CLI Cookbook: Adding A Static Route

This topic describes how to add a static route.

Procedure

1. Log in to the Delphix Engine as the sysadmin user and switch to the network route context.

   delphix network route> list
   DESTINATION      GATEWAY       OUTINTERFACE  PROTOCOL
   default          172.16.0.1    ens192        DHCP
   10.1.2.0/24      -             ens224        KERNEL
   172.16.0.0/24    -             ens192        KERNEL

2. Run the create command to add a new route.

   delphix network route> create
   delphix network route create *> set destination=192.168.11.0/24
   delphix network route create *> set gateway=10.1.2.1
   delphix network route create *> get
       type: NetworkRoute
       destination: 192.168.11.0/24 (*)
       gateway: 10.1.2.1 (*)
       outInterface: (unset)

3. Optional outInterface Property

   Setting the outInterface property is optional, as the system will automatically determine the output interface based on the gateway address provided, as shown below.

4. Committhe operation.

   delphix network route create *> commit
   delphix network route> list
   DESTINATION      GATEWAY       OUTINTERFACE  PROTOCOL
   default          172.16.0.1    ens192        DHCP
   10.1.2.0/24      -             ens224        KERNEL
   172.16.0.0/24    -             ens192        KERNEL
   192.168.11.0/24  10.1.2.1      ens224        STATIC