How to Change the IP Address of the Delphix Engine
Configuration / Network and DNS Management / How to Change the IP Address of the Delphix Engine

Changing the IP Address

  1. Stop all running VDBs by clicking the Stop button on the VDB card.
  2. Disable all dSources.
  3. You can use either the command-line interface or the Delphix Setup application to change the IP address of the Delphix Engine.
    1. To use the command-line interface, follow the instructions described in Setting Up Network Access to the Delphix Engine.
    2. To use the Delphix Setup application, go to System > Server Setup in the Delphix Management interface, or click Server Setup in the Delphix Engine login screen.
      1. In the Network panel, click Modify.
      2. Under DNS Services, enter the new IP address.
      3. Click OK.
  4. Refresh all Environments by clicking the Refresh Symbol on the Environments screen.
  5. Enable all dSources.
  6. Start all VDBs by clicking the Start button on the VDB card.

Changing the IP Address via CLI

  1. Stop all running VDBs by clicking the Stop button on the VDB card.
  2. Disable all dSources.

  3. Log into the Delphix CLI using your sysadmin account. You can find instructions on how to do this in the Connecting to the CLI article.

    delphix> network
delphix network> setup
delphix network interface> list
NAME     
vmxnet3s0
delphix network interface> select vmxnet3s0 
delphix network interface 'vmxnet3s0'> get
    type: NetworkInterface
    name: vmxnet3s0
    addresses:
        0:
            type: InterfaceAddress
            address: 10.1.2.3/24
            addressType: STATIC
            enableSSH: true
            state: OK
    dataNode: DATA_NODE-34
    device: vmxnet3s0
    macAddress: 0:c:29:32:96:a3
    mtu: 1500
    mtuRange: 60-9000
    reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
    state: OK

  4. Run the update command and update the address to the new IP address for the Delphix Engine. 

    delphix network interface 'vmxnet3s0'> update
delphix network interface 'vmxnet3s0' update *> edit addresses.0
delphix network interface 'vmxnet3s0' update addresses.0 *> get
Properties
    type: InterfaceAddress
    address: 172.16.151.154/24
    addressType: STATIC
    enableSSH: true
    
delphix network interface 'vmxnet3s0' update addresses.0 *> set address=10.1.2.4/24
delphix network interface 'vmxnet3s0' update addresses.0 *> get
    type: InterfaceAddress (*)
    address: 10.1.2.4/24 (*)
    addressType: STATIC (*)
    enableSSH: true (*)

  5. Commit the operation.

    delphix network interface 'vmxnet3s0' update addresses.0 *> commit
delphix network interface 'vmxnet3s0'> get
    type: NetworkInterface
    name: vmxnet3s0
    addresses:
        0:
            type: InterfaceAddress
            address: 10.1.2.4/24
            addressType: STATIC
            enableSSH: true
            state: OK
    dataNode: DATA_NODE-34
    device: vmxnet3s0
    macAddress: 0:c:29:32:96:a3
    mtu: 1500
    mtuRange: 60-9000
    reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
    state: OK

  6. Re-enable the VDBs and dSources running from the engine.

Related Topics