Multiple Device Removal in the Delphix Engine 6.0.12.0 and higher version introduces a breaking kernel module change that requires a reboot to load the new module. Therefore, a deferred reboot engine upgrade operation will be unable to remove devices until a reboot is performed.

Release 6.0.15.0 Changes

Delphix OS Fixes

Bug NumberDescription
DLPX-80760

Increased the inotify limit to address a defect during upgrade.

Management Server Fixes

Bug NumberDescription
DLPX-68240

Fixed an issue where LogSync for an Oracle RAC standby does not set max number of backup tasks correctly.

DLPX-73375

Added granularity in restore job events to mark various phases of Restore Backup process.
Added events in Restore Backup job to provide information at the start of the Redo phase of a restore command.

DLPX-75677

Fixed an issue causing auto population of the encryption key when no input is given.

DLPX-78913

Fixed a minor typing issue when deleting a MSSQL database.

DLPX-79228

Fixed a VDB Start Fault after a VDB start job is successful.

DLPX-79528

Made improvements in environment monitoring to return the NO_DELPHIX_DATABASE status for Staging Push dSources when they are not managed by Delphix, and avoids monitoring other attributes for such databases.

DLPX-79596

Made a change in the enable flow for Staging Push dSources to always make an attempt at unmounting the DATA storage before dropping the staging database.

DLPX-79780

Mount with local_lock=all on Linux, when mounting VDBs with NFSv3.

DLPX-79999

Use the offset in the time_zone column of msdb.dbo.backupset to convert the timestamp correctly for a backup from a source, and then continue using the staging host timezone to display the time of a snapshot on the UI.

DLPX-80206

Updated MD5 checksums for Oracle 12.1.0.2.0 OJDBC jars.

DLPX-80254

Fixed an issue where Oracle JDBC jar checksum checks are being reported as false positives despite underlying database connection issues.

DLPX-80406

The Spring framework has been updated due to the Spring4Shell vulnerability.

DLPX-80487Fixed an issue where the Delphix UI would sometimes not render, showing waiting for response.
DLPX-80494

Added an action item to check for support Host and Server Type combination while adding MSSQL environments.

DLPX-80619

This change will introduce the ability to add sporadic failures via tunable: ADDITIONAL_SPORADIC_FAILURES.

DLPX-80909

Cross-Site Scripting (Reflected) in /resources/json/delphix/session.

DLPX-81048

Removed the requirement for Linux kernel recover-lost-locks setting when using NFSv4 with Oracle dNFS.

DLPX-81090

Can now enable/disable SNMPv3 vs. v1/v2.

DLPX-81100

Updated the command for checking database files accessibility while fetching the VDBs status with a lighter and less intrusive command, to get relief from VDBs being stopped randomly.

DLPX-81242

Fixed an issue preventing the upgrade of a replication Continuous Vault source with automatic replication.

DLPX-81308

Fixed an issue causing Appdata SnapSync to crash with NullPointerException when a virtual database is not successfully refreshed or rollbacked.

DLPX-81358

Fixed the unnecessary alerts of timezone discovery failure that users were facing randomly for the cluster environments.

DLPX-81502

Improved performance of the Replication page.

DLPX-81696Users should now be able to enable the feature flag AZURE_DATA_BANK.
DLPX-81710Fixed an issue where an engine could not be setup when objectStorage is enabled.

Release 6.0.14.0 Changes

Security Fixes

Bug NumberBug Introduced inDescriptionSecurity Bulletin
DLPX-81059

5.2.2.0

Arbitrary Code Execution may be performed when configuring masking environments

TB098

Management Server Fixes

Bug NumberDescription
DLPX-38908

Oracle LogSync should automatically resolve faults for transient issues

DLPX-39193

Null Pointer Exception in Oracle LogSync backup stream handler

DLPX-57078

Job cancel requests during Oracle provisioning are not processed until the end of recovery

DLPX-57405

move-to-asm.sh does not support TDE-enabled databases

DLPX-62343

disable the OPTIONS method for all HTTP(S) requests

DLPX-64386

Oracle LogSync thread may hang when trying to remove temporary RMAN command file from source host toolkit directory

DLPX-65413

Ensure "source-archive" directory is unmounted at start of Oracle Provision

DLPX-66879

Oracle LogSync can create orphaned logs in certain scenarios

DLPX-69453

Provide tunable for Oracle LogSync client timeout

DLPX-69802

Common Toolkit directory is not removed from a mounted shared NFS location when the environment is deleted

DLPX-76382

Force disable should succeed despite environmental problems

DLPX-77840

Fixed an issue on the Setup pane to allow successful completion of an smtp test against a specific email address

DLPX-78412

SCM/Talaria failure reason should be communicated in the Delphix fault warnings

DLPX-78726

Removing windows environment performs cleanup of iSCSI persistent login target

DLPX-78754

Disable operation is prohibited on replicated sources

DLPX-78986

Prevent DSP connections for disabled Oracle RAC cluster nodes

DLPX-79077

Resolved an issue of an infinite spinner when validating BEQ credentials for Oracle dSource with duplicate unique_name. While linking a dSource, credentials are now required when discovering an unknown CDB.

DLPX-79242

Splunk HEC token logged to debug logs during splunkHec test

DLPX-79396

Allow users to unset Oracle database user name and credentials through CLI if Simplified Connection Management is enabled.

DLPX-79502

SnapSync fails if more than 1000 tempfiles exist in the whole CDB

DLPX-79591

Changed the NFSv4 minimum supported target Redhat version to 6.4 (was previously 6.3).

DLPX-79742

Unable to provision PostgreSQL VDB to Linux host with processor type of ppc64le

DLPX-79823

Improved the action item for failure to enable/attach the staging push dSource.

DLPX-79942

Improved the action item for failure to enable/attach the staging push dSource.

DLPX-80137

Limit SNMP configuration access to sysadmin

DLPX-80144

Oracle SnapSync crashes with NullPointerException when a PDB dSource is renamed and replaced with a new PDB of the same name

DLPX-80217

Fixed issue with filename conflicts during source backup restore

DLPX-80302

It was necessary to restart the auxiliary CDB during a TDE provision after recreating the autologin keystore

DLPX-80369

Oracle environment monitor triggers fault.oracle.db.connection.failed fault immediately on dataset stop or disable.

DLPX-80415

Fixes long delay in operations such as VDB start/stop when JDBC Thin connection to database fails due to unable to establish network connection.

DLPX-80439

Provide mount location to upgrade scripts during Lua to Python upgrade process if mount specification has not been provided.

DLPX-80440

Fixed spinner issue while provisioning a VDB from a SQL Server staging dSource from Provision VDB option in datasets menu

DLPX-80482

TDE-enabled provisions to a RAC target fail with "ORA-28365: wallet is not open" while attempting to reopen the database in start_database.sh in the auxiliary

DLPX-80483

Fix failing TDE-enabled vPDB provisions to a linked RAC container database due to "ORA-28365: wallet is not open" errors

DLPX-80487

Improved performance across dataset and replication related pages.

Delphix OS Fixes (Activated after optional Reboot) 

Bug NumberDescription
DLPX-80078

The issue with removing files with complex file permissions on EBS is now fixed

Release 6.0.13.1 Changes

Management Server Fixes

Bug NumberDescription
DLPX-80818libc upgrade necessitates PostgreSQL re-index.

Release 6.0.13.0 Changes

Security Fixes

Bug NumberBug Introduced inDescriptionSecurity Bulletin
DLPX-79789

5.3.0.0

Arbitrary Code Execution May Be Performed by Engine System Administrators.

TB096

Management Server Fixes

Bug NumberDescription
DLPX-7868The issue with the confusing vPDB error on a snapshot after resetlogs of a linked CDB is now fixed.
DLPX-41671You can now update the Oracle cluster home through the user interface.
DLPX-43467When dSource is an Oracle standby in RTA mode, LogSync was raising the fault.oracle.linkedsource.log.conflict error and getting disabled on its own. This issue is now fixed.
DLPX-50309Users can now change logSyncInterval for Oracle dsources.
DLPX-59757The count for masking jobs fetched from the Masking Engine is now configurable. By default, it is set to 500.
DLPX-67604The manual recovery of a database after V2P from a snapshot of dSource was failing with an error. This issue is now fixed.
DLPX-68684The self-signed certificate is now compliant with the requirements for trusted certificates in MacOS 10.15.
DLPX-74613Oracle VDB migration check needs to be done against the Oracle target host instead of the source. Furthermore, the Error and Action plan provided should include the target hostname.
DLPX-75467The CLI now returns correct and descriptive error messages when executing unauthorized requests on uninitialized engines.
DLPX-75646To diagnose BEQ connection failure, this release adds MD5 checksums for ojdbc*.jar for Oracle release versions up to currently supported release version.
DLPX-75878The issue with the JDBC connection string for an Oracle vPDB not getting updated after an IP address change is now fixed.
DLPX-75989The issue with the failure of environment discovery of an Oracle Cluster with a NullPointerException error is now fixed.
DLPX-76956Previously, the Oracle JDBC test connection with the wrong password was increasing the LCOUNT value by more than 1. This issue is now fixed.
DLPX-77140This release now speeds up metadata that is sent during replication when Extended retention is involved.
DLPX-77231Previously, when source discontinuity on the dSource was followed by resync on the livesource, one or more livesource workers were failing to start. This prevented livesource status from getting updated and the first snapshot from being taken after resync. This issue is now fixed.
DLPX-77600This release fixes NPE when Linking dSource with missing backup and unreachable nodes.
DLPX-77880This release improves scalability for engines with an extremely large number of snapshots that were causing them to run out of memory.
DLPX-78015Previously, V2P export with absolute data files was failing with an internal error. This issue is now fixed.
DLPX-78174Insecure DES is no longer supported for SNMPv3.
DLPX-78420This release adds V2P support for Windows server 2022 host machines.
DLPX-78473This release improves load times for Datasets and Dataset Performance pages for engines with a large number of datasets and containers.
DLPX-78488Previously, when switching from the backup server to ASE, dump history was not working for dSources configured to use the remote backup server. This issue is now fixed.
DLPX-78594This release fixes an issue with disabled VDBs not being able to undo a refresh.
DLPX-78688TLS 1.0 and TLS 1.1 ciphers are no longer available. Any system that is only configured with TLS 1.0 or TLS 1.1 ciphers is switched to use the default cipher set.
DLPX-78693Invalid sync parameters will not cause DE server unavailability.
DLPX-78696Switching sync strategy from source sync strategy type to sourceless strategy type is not allowed.
DLPX-79126VDBs can now be automatically started with the tunables if stopped intermittently because Windows fail to write on the mount (Msg 9001).
DLPX-79292This release eases restrictions on taking a snapshot of PDBs with encrypted UNDO tablespaces.
DLPX-79344Previously, Snapsync of a standby PDB in mount mode was failing with the ORA-01109: database not open error message. This issue is now fixed.
DLPX-79422Previously, clicking on a Replication Profile was resulting in an unknown error message dialog. This issue is now fixed.
DLPX-79789Under certain conditions, arbitrary code execution may be performed by sysadmins.
DLPX-79808This release fixes failures if the VDB name is more than 68 characters.

Release 6.0.12.1 Changes

Management Server Fixes

Bug NumberDescription
DLPX-79151The issue with remote syslog configurations preventing engine upgrades or virtualization service restarts is now fixed.

Release 6.0.12.0 Changes

Log4j Updates

Based on detailed testing and analysis, all the currently supported products are not susceptible to known log4j vulnerabilities. Please refer to TB095 Technical Bulletin for more information. All instances of log4j in currently supported Delphix products are updated to log4j 2.17.1 as of this release.

Delphix keeps you updated on the latest developments and keeps releasing hotfixes, procedures, and workarounds for such critical vulnerabilities. For more information on how Delphix supports our product and customers in such cases, see Delphix Product Security

For more information, refer to the following pages:

Management Server Fixes

Bug NumberDescription
DLPX-23068Validation for target database parameter 'DB_FILES' for single-tenant databases for the following operations: provisioning, refresh, rewind, and converting a dSource to LiveSource is now added. Furthermore, specific error messages for handling ORA-00059 errors are added.
DLPX-44544The issue with the SnapSync of an Oracle standby dSource in Real-Time Apply mode calculating the snapshot's timestamp incorrectly is now fixed. This issue was resulting in ORA-01194 or ORA-01152 errors when provisioning to a timestamp after the snapshot.
DLPX-56691The issue with the data files of a VDB getting unmounted when provisioning, refresh, or rollback job is canceled manually is now fixed.
DLPX-57971The issue with the latest snapshot of a LiveSource taking a long time to show the SCN/timestamp range on its card in the GUI is now fixed.
DLPX-60320UI now allows the selection of older dataset repositories (downgrade) in addition to selecting newer ones (upgrade).
DLPX-67069The issue with the stopped Oracle VDB monitoring by the environment monitor that resulted in connection errors flooding the debug log is now fixed.
DLPX-68132The issue with the “Copy query to clipboard” SQL copy functionality in the “Managed Source Data” is now fixed to have correct apostrophe characters.
DLPX-72123The issue with the failure of detaching or deleting an Oracle dSource operation on RAC environments (This issue was occurring due to failure of deletion of RMAN backups on RAC and the operation needs to be retried with a force option) is now fixed.
DLPX-72779The UI showing enabled or disabled for cluster nodes now uses a grid table. The Enabled column contains a checkmark to show whether the cluster is enabled or disabled. Users are able to select or unselect the checkmark to enable or disable a cluster.

DLPX-73975

Critical storage faults should not be ignorable nor manually resolvable
DLPX-74862This release fixes an issue where the RESUME operation failed without any error thrown to the user on dSources where ENFORCE was still in progress. The fix will make sure that even if RESUME fails, it throws a DUE to the user with suggested actions to resolve the issue.
DLPX-75763The issue with the failure of refreshing a VDB provisioned as an empty vfiles since there is no parent container to refresh from is now fixed. 
DLPX-76266The issue with the VDB Disable operation that resulted in an error message while connectivity with the host machine can't be established is now fixed.
DLPX-77123You can now run Upgrade Verify when another upgrade is in progress.
DLPX-77347This release fixes the difference in time shown for MSSQL snapshot based on different database authentication methods.
DLPX-77638The issue with the failure of the End Entity Certificate expiration fault is now fixed.
DLPX-77664The issue with the failure of the Oracle SnapSync with an error message, "RMAN-06183: datafile or datafile copy (file number ) larger than MAXSETSIZE" if a datafile resized in the middle of SnapSync is now fixed.
DLPX-77913The issue with the faults table missing data if there was more than one page of faults is now fixed.
DLPX-77925The issue with the unsupported Windows release error message is now fixed.
DLPX-78113MSSQL VDB database size will now be refreshed periodically based on environment_monitor.dynamic_attributes_check_period tunable.
DLPX-78183The issue with the MSSQL validated sync schedule not getting updated without successful backup restoration is now fixed.
DLPX-78244The issue with the failure of a few operations on self-service containers due to incorrect entries corresponding to the Oracle log metadata on the Delphix engine is now fixed.
DLPX-78258The issue with the input bug that retained cleared out DB credentials in the dSource linking wizard is now fixed.
DLPX-78263The issue with the failure of a SnapSync of an Oracle standby dSource in Real-Time Apply mode with an error message, "exception.oracle.snl.linkedsource.current_scn.invalid" if the rate of change in the database is low is now fixed.
DLPX-78265Offline Oracle bystander PDBs data files can now be optimized leading to improved provision performance.
DLPX-78309The issue with the CLI being unable to log in to system users when the main virtualization service is down is now fixed.
DLPX-78334The issue with a large number of missing Oracle archive logs causing an error while viewing dataset is now fixed.
DLPX-78392Hosts running Windows Server 2022 can now be added as Source and Target environments to the Delphix Engine.
DLPX-78522SSLv3, TLS 1.0, and TLS 1.1 are no longer configurations options for HTTPS. Any system configured only with these removed options will be automatically set to use TLS 1.2.
DLPX-78791This release upgrades log4j from 1.2.17 to the latest 2.x in Windows Connector.
DLPX-78938This release upgrades log4j in virtualization to 2.17.1.

Release 6.0.11.0 Changes

Security Fixes

Bug NumberBug Introduced inDescriptionSecurity Bulletin
DLPX-77921

6.0.8.0

Arbitrary Code Execution by Delphix System Administrators may be Performed on Virtualization and Masking EnginesTB094

Management Server Fixes

Bug NumberDescription
DLPX-53019

The issue with the missing redo alert raised during the environment monitor check has now been resolved.

DLPX-59299

Discovery and monitoring rely on "Connected" in sqlplus output, which may not be the case if NLS_LANG is set to another language (e.g. Japanese). Downstream operations, like linking or provisioning, may then fail due to missing user privileges.

DLPX-59662The issue with copy-Only Backups failure with Virtual Service Accounts has now been resolved.
DLPX-62706

The issue with the Hostchecker not properly checking /home/delphix permissions has now been resolved.

DLPX-64082

The issue with Oracle Provisioning scripts having hard-coded timeout issues has now been resolved. 

DLPX-65729

Added retry functionality to the 'read backup files' operation during a validated sync to an account for an unstable environment.

DLPX-69778SAML response is not logged on successful SSO login.
DLPX-72043

The issue where LiteSpeed xp_restore_headeronly stored procedure failure message are displayed when validated sync is active for dSources with LiteSpeed backup has now been resolved.

DLPX-72220

A UI issue that occurred while updating the vault when only the private key is changed has now been resolved.

DLPX-72225

Admin user created from management UI is no longer showing as 'non-admin' type.

DLPX-72237

The 'Verify Credentials' button from the DSP Throughput test page is now removed.

DLPX-72369

The dependency on a parent snapshot relying on the latest snapshot is now removed if a parent snapshot does not exist during the VDB enable operation.

DLPX-72778

Oracle dSource attach operation with changed DB ID using 'Force' option is now allowed.

DLPX-74555

Updated the "no Delphix connector" message while provisioning a Windows source environment.

DLPX-74676

Oracle LiveSource LogSync should only catalog valid archive log files.

DLPX-74851

In the Add Environment GUI, the mouseover information for "Set Delphix Session Protocol Options (DSP)" has been corrected.

DLPX-74896

The race condition issue when running Oracle VDB refresh and dSource snap sync resulting in incorrect MDS entry for the parent snapshot of a VDB in the dlpx_timeflow table has now been resolved.

DLPX-75335

Added a product name and product version for the Delphix Connector executable so this information can be available before installation.

DLPX-75500For ag cluster nodes, if the refresh fails due to timezone discovery failure, don't delete the nodes from MDS as it doesn't mean we had an issue with the nodes.
DLPX-75952

Database configs will be replicated only if the associated VDB is replicated.

DLPX-75995

The issue causing environment 'Add' or 'Refresh' to fail when PowerShell Transcription is enabled has now been resolved.

DLPX-76244

The issue where TCP fallback connection to database stops responding if the Oracle database instance is down has now been resolved.

DLPX-76290

Databases of UNKNOWN cdb type are now included in the attachment of a non-PDB container.

DLPX-76731

Added Delphix support for WALLET_ROOT and TDE_CONFIGURATION parameters to manage wallets in 19c instead of sqlnet.ora.

DLPX-76759

Added "Response" to faults along with other details when logged in the Admin App.

DLPX-76777

Remove orphaned Oracle logs resulting from archive log fetch timeouts.

DLPX-76793

Added execution timeout for execution of UpdateFileACL.ps1.

DLPX-76974

The issue where a user was unable to change 'from address' of SMTP server to noreply@delphix.com in the GUI has now been resolved.

DLPX-77112

The issue where an Oracle VDB cannot be provisioned between different minor versions if the Source is on higher RU has now been resolved.

DLPX-77284The issue where after a hotfix was removed due to a successful upgrade, the system would still indicate the hotfix was installed post-upgrade has now been resolved.
DLPX-77345

The issue where provisioning a vVDB fails with java.lang.OutOfMemoryError when sqlplus is used to rename the datafiles has now been resolved.

DLPX-77405

Replicated password vaults will no longer be visible in the UI.

DLPX-77676

The issue where provisioning a vPDB from a PDB dSource fails with "ORA-65114: space usage in container is too high" if PDB max_size/max_pdb_storage is configured has now been resolved.

DLPX-77708

The issue where a refresh/disable/destroy of a VDB using NFSv3 could cause loss of access to other VDBs that were using NFSv3 has now been resolved.

DLPX-77844

The issue where V2P operations from a VDB snapshot would result in the deletion of any production datafiles that exist on specified V2P target directory has now been resolved.

DLPX-77904

Removed 'Factory Reset' for Delphix Engines that are Data Vaults, as the operation is disabled for those engines.

DLPX-77912

The issue that can cause a VDB stop, refresh, or rollback to fail with an internal error has been resolved.

ORB-2465

Removed the requirement that SAML SSO email addresses must match case-sensitively for SSO logins.

Delphix OS Fixes

Bug NumberDescription
DLPX-77577

Increased nvme I/O timeout to prevent storage issues in EC2 (Activated after optional Reboot).

Release 6.0.10.1 Changes

Management Server Fixes

Bug NumberDescription

DLPX-77467

Loading the setup app dashboard (as sysadmin) was rendering a server error popup with instruction to contact Delphix Support. This 6.0.10.0 error has been known to impair the ability to configure web proxy, PhoneHome, SMTP servers, and other connectivity settings via the GUI. It has now been resolved.

Release 6.0.10.0 Changes

Management Server Fixes

Bug NumberDescription

DLPX-18438 

The issue with provisioning to the latest available time that resulted in generating theexception.oracle.target.point.not_provisionableexception has now been resolved.
DLPX-35480

Previously, static routes were being added using the add command. Now, the same can be added using the create command.

DLPX-57516

The issue with the failure of management service to start after configuring some abbreviated timezones from a picklist in server setup or sysadmin CLI has now been resolved.

DLPX-58133

Previously, the Oracle SnapSync operation was resulting in a warning for BCT usage on editions that do not provide it. This issue has now been resolved.

DLPX-58675

The issue with the deletion of the last snapshot on timeflow by Retention during a failed Oracle DB_SYNC operation has now been resolved.

DLPX-63003

The issue with memory being exhausted while reading too many snapshots from MDS has now been resolved.

DLPX-63347

If the staging source has the "Use as Staging" flag set as off, the user was seeing a specific exception while trying to enable a linked dSource to point in the direction of what needs to be done. Any compatibility failure will now have a specific exception.

DLPX-63601

Previously, querying the following operation "backupset table" and "whether a database is part of AG or not" was resulting in deadlocks and lock timeouts errors. We have now added retries to resolve the issue.

DLPX-64369

The issue with throwingfault.oracle.linkedsource.incomplete.tempfilefor physical standby has now been resolved.

DLPX-65949

The issue with misleading status in the progress bar while taking a copy-only backup has now been resolved.

DLPX-69831

Previously, the Oracle dSource SnapSync operation was not displaying a clear failure message if a dSource db_unique_name is changed. This issue has now been resolved.

DLPX-70317

The issue with the restarting of the NFS-server by the reaper thread while deleting a vPDB from a linked CDB with Talaria turned on has now been resolved.

DLPX-71018

The issue with UI displaying only the suffix of the device name used by Hyper-V has now been resolved. UI now displays a unique device name for storage in Hyper-V.

DLPX-71292

The issue with the allowance of incremental SnapSync after LogSync throwsfault.oracle.linkedsource.log.conflicthas now been resolved.

DLPX-71639

The NFSv4 is now set as the default option when mounting datasets from OS platforms that support it.

DLPX-71769

The need to set permissions of$ORACLE_HOME/dbssubdirectories using STARTUP SPFILE syntax is now removed. 

DLPX-72011

The issue with the CLI network setup not configuring the first network interface when multiple interfaces exist has now been resolved.

DLPX-72186

The issue with CDB log file retention working incorrectly if a PDB has multiple time flows pointing to the same CDB timeflow has now been resolved.

DLPX-72432

The format ofzpool_iostat_60.loghas been enhanced in this release. A timestamp is recorded for each sample in the log, making it easier to determine the time for each sample.

DLPX-72956

The issue with disabling the Oracle LogSync after running the validated sync job has now been resolved.

DLPX-73575

The timezone monitoring is now added for the Windows hosts.

DLPX-73590 You can now refresh a VDB whose parent dataset is in a different group without needing authorization on the parent or its group.
DLPX-73800

The issue with the failure of olsnodes when run as a non-Oracle user has now been resolved.

DLPX-74504

The issue with throwing a new DUE and NotFoundException when ojdbc libs cannot be read has now been resolved.

DLPX-74945

UI now displays a detailed error message for transaction log-chain break fault.

DLPX-74992

The issue with the failure of SnapSync operation when Database incarnation reset-logs end time is changed from "2021-03-13 22:03:07.0" to "2021-03-13 21:03:07.0" for virtual pluggable database “<database>" has now been resolved.

DLPX-75389

The issue with the recording of the insufficient details by Logsync when dbid change was detected has now been resolved.

DLPX-75517

The issue with the failure of the Oracle vPDB provisioning with the "ORA-00959: tablespace 'TEMP' does not exist" error has now been resolved.

DLPX-75721

The issue with the failure of an Environment discovery with the "DelphixFatalException: Unknown Oracle Database status: REFRESHING" error has now been resolved.

DLPX-75737

The issue with saving unnecessary logs by Retention if bookmark falls exactly on a snapshot end SCN or snapshot end timestamp has now been resolved.

DLPX-75897

Previously, failure to start I/O services after the upgrade operation was resulting in a stack restart loop. This issue has now been resolved.

DLPX-75951

The internal error being signaled during VDB SnapSync byremoveUnneededZFSFileswhen a data file is physically removed during processing by an external cause has now been resolved.

DLPX-76288

The NFS latency for workloads involving a lot of parallel I/O (e.g. Oracle VDBs with concurrent accesses to many data files) is now improved.

DLPX-76388

Previously, entering key pairs directly into hook environment variables, as opposed to via a vault or as passwords were resulting in an internal error. This issue has now been resolved.

DLPX-76406

The issue with NFS-based VDBs becoming unresponsive has now been resolved.

DLPX-76447

The issue with the V2P Functionality to customize target directory structure for exporting database files to separate file systems not working as documented has now been resolved.

DLPX-76613

The issue with the unnecessary accumulation of heap when validated sync is active for dSources using an environment user that eventually can cause out of memory issues has now been resolved.

DLPX-76690

The issue with the removal of extraneous Oracle data files while creating snapshots has now been resolved. The extraneous Oracle data files are now removed during the provisioning operation.

DLPX-76692

For V2P operation, we now use the unbuffered copy method for better performance.

DLPX-76718

The issue with the creation of the extraneous Self-Service branch segments during the replication operation has now been resolved.

DLPX-76760

Environment clusters will now show faults from their child nodes.

DLPX-76802

Previously, the engines that are in the DEFERRED upgrade state were resulting in the "Large Receive Offload" option turned off which was leading to performance degradation in network transfers. This issue has now been resolved. Upgrading the engines that are in the DEFERRED state will also resolve the issue.

Screen reader support is now enabled.

DLPX-76891

CRON expression labels now ask for Quartz format on the user interface.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-76619

The NFS reliance on DNS to prevent VDB unresponsiveness related to DNS unreliability is now reduced.

DLPX-76203

The NFS latency for engines with many Oracle dNFS clients is now improved.

DLPX-76119

The issue with the Delphix Engine crashing or becoming unresponsive when canceling a replication job has now been resolved.

DLPX-76991

Optimized in-memory cache eviction by making minor improvements to I/O performance.

Release 6.0.9.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-28435MS SQL instances PatchLevel will be displayed in preference to the version on the UI.
DLPX-40005Improved the error message that is displayed when a JDBC connection cannot be established or the Oracle database Instance is unavailable.
DLPX-48080Oracle Home Check may generate spurious faults if Oracle Home entry does not exist in /etc/oratab.
DLPX-55951Attempting to provision a plugin-based VDB onto an incompatible OS (Windows to Linux or vice versa) is possible in the UI, and would fail with a crash requiring a restart. Now an informative error message is shown after the attempt is made.
DLPX-59613Fixed creation of retention policies workers on replica objects after failover.
DLPX-64307Environment refresh should ignore cluster discovery for Oracle VDBs.
DLPX-66191Fixed the side-effects of the native Windows "Recent Files" behavior, when large numbers of PowerShell operations are being run concurrently.
DLPX-67537Domain administrators can now create, view, and edit the alert profiles of other domain users.
DLPX-69605Poor error message when selecting Timeflow range.
DLPX-70502On detaching a dSource, delete backup server entry from MDS and related ones if the backup server is unused.
DLPX-71002In case we have null values coming for recovery_model from msdb.dbo.backupset table, the user will see a generic exception for manual sync and a fault for validated sync.
DLPX-71908Users will now see a warning when they remove any object from the replication specification list.
DLPX-72012Prevents the same IP address from being configured on more than one network interface.
DLPX-72411Environment names for Windows and Oracle Clusters are once again editable by users.
DLPX-72609When we do MSSQL standalone environment discovery, the user will see a warning for databases attached to AG that are present and will not be discovered unless cluster environment discovery is selected.
DLPX-72695Improved Oracle SnapSync performance by eliminating unnecessary calls to getTotalHoleBlocks.
DLPX-73409Duplicate listener entry gets generated in MDS if Oracle listener is manually started with a non-uppercase name.
DLPX-73586Fixed a display error of some snapshot names in the command line interface which showed references instead of actual names.
DLPX-73720Provisioning an Oracle vPDB fails with "ORA-65149: PDB name conflicts with existing service name in the CDB or the PDB" if the PDB and CDB names are the same.
DLPX-74050Environment names for Windows and Oracle Clusters are once again editable by users.
DLPX-74078The Target Directory path is combined with other directories such as Data Directory, Archive Directory, Temp Directory, etc to build the full path for data files, archive logs, temp files, etc. As long as the combined paths are valid the V2P job proceeds.
DLPX-74197Fixes a misleading warning about insufficient space on a replication target.
DLPX-74201Snapshots created as a result of refresh or rewind operations will now be labeled as just "Snapshot" to avoid confusion. Users are advised to look at the Timeflow markers to know when the Timeflow operation was performed.
DLPX-74367Delphix Engine repeatedly reports "Failed to parse logfile".
DLPX-74377Improved diagnostics information for the case when Delphix Engine fails to connect to the Windows host.
DLPX-74387fix an issue that causes the management service to crash under heavy CPU load.
DLPX-74398Added handling of dangling nodes during Windows cluster environment add and refresh operations.
DLPX-74486Delphix OS users cannot provision 12.2 TDE vPDB due to directory permissions in the default wallet location.
DLPX-74495Enabled more logging in Delphix connector logs for timeouts.
DLPX-74681During RAC vPDB provision, Oracle 19.9 target CDB crashes with ORA-00600 [krccfl_chunk] when BCT is enabled.
DLPX-74806Improved error message displayed when the storage device initialization fails unexpectedly.
DLPX-74860Provisioning the 2nd generation VDB fails if the dSource has imported read-only transportable tablespaces fails.
DLPX-74975Allow adding invalid or unreachable paths as a shared backup location for dSources.
DLPX-75026Invalid JDBC connections are not purged from the connection pool when the home is changed.
DLPX-75134Improved performance for the Environment Databases pages when there are a lot of databases.
DLPX-75363Update exception description is seen when the SnapSync fails for ASE encrypted database.
DLPX-75401local listener set to null if oracle.lsnr.protocol_registration_order is quoted.
DLPX-75506Fix a bug that can cause Oracle RAC VDBs to fail with stale NFSv3 mounts if NFSv4 is also enabled.
DLPX-75532Insufficient heap memory settings on AIX cause connector and SnapSync to hang or crash.
DLPX-75663FIPS compliant algorithms will be used while merging the old and new toolkit directories during environment refresh.
DLPX-75716Delphix may remove Oracle VDB temp tablespaces during Snapsync.
DLPX-75735Fixed creation of retention policies workers on replica objects after failover.
DLPX-75834Rearranged Syslog configuration dialog inputs to avoid confusion and have a more consistent user experience.
DLPX-75858BEQ processes can hold on to file descriptors leading to hook scripts hanging after upgrading to 6.0.7.0.
DLPX-76018Remove hardcoded 5-minute timeout for doDropPDBKeepDatafiles.sh.
DLPX-76140TDE SnapSync should ignore WARNING plugin violations.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-71980Fix a bug that was causing the Delphix Engine storage pool to fail to import on boot under certain circumstances.

Release 6.0.8.1 Changes

 Management Server Fixes

Bug NumberDescription
DLPX-75804Some Delphix operations may fail if mount and umount commands, on staging or target hosts, are setup to run as sudo and if sudo rules prohibit these commands from running with unrecognized options. The issue is fixed now after removing "-v" added in 6.0.8.0.

Release 6.0.8.0 Changes

Management Server Fixes

Bug Number

Description
DLPX-49694Skip parsing of DBCC when code 0 is not present in the DBCC page output. In case the DBCC page has code 0 but not dbid, use bdbid (present in the buffer section).
DLPX-68764

VDB SnapShot does not progress if ASE database devices are not on Delphix storage, environment monitoring raises a fault. Subsequent VDB operations like enable, disable, start, stop, delete, snapshot, or refresh will fail.

DLPX-70793

Delphix Engine should not allow linking Oracle DB with null  db_unique_name.

DLPX-71300

For newer ASE versions (>= 15.7 SP138 and 16.0 SP02 PL05 and ASE 16.0 SP03), do not run DBCC PAGE anymore, as it was an identifier for DBCC CHECKALLOC that is already not run.

DLPX-71471

Error message asking user to manually perform disable/enable operation or correctly rename the target database back will be displayed during Start VDB, if VDB does not exist.

DLPX-71687

Provide a mechanism to enable VDBs up to filesystem mount point.

DLPX-71875

Fixed a bug that results in a memory reservation not being represented correctly in the Delphix API.

DLPX-72046

Deletion of vPDB in a vCDB shows this warning, "Encountered an error while shutting down and cleaning up Oracle files."

DLPX-72209

Downloading a support bundle is not supported at the same time that an upload of an upgrade image has been initiated by the same Delphix user.

DLPX-72319

Fixed an issue where some error dialogs would freeze in Internet Explorer 11.

DLPX-72705

Connection timeout when deleting remote shipper script can cause a timeout in LogSync client.

DLPX-72757

ASE sync using Dump History fails for large dump history files.

DLPX-72780

Timezone is set incorrectly for snapshots of Solaris 10 dSources and VDBs.

DLPX-72904

Storage capacity now includes usage from all file system objects, not just snapshots.

DLPX-73143

Fixed an issue where the support bundle dialog showed a loading spinner intermittently while jobs were running.

DLPX-73354

Traverse all shared backup locations while syncing, even if some of the paths are invalid or not reachable.

DLPX-73489

Fixed bug where adding or editing a parameter using the UI VDB Config Template "Text" tab was truncating the parameter's value.

DLPX-73602

Incorrect mount options used when a single instance RAC is linked as a standalone single instance.

DLPX-73607

Added paging for days with large numbers of snapshots to prevent slowdown.

DLPX-73623

Fixed an out-of-memory condition that occurs in SSH tunneling for encrypted log-syncs when storage latencies are high.

DLPX-73627

The help text on upgrade replication warnings have been updated to avoid confusion between Ignored and Resolved.

DLPX-73668

Fixed Missing security headers.

DLPX-73669

Cross-site request forgery (CSRF) issue in management UI.

DLPX-73727

Fixed an issue where the faults table was unable to navigate to other pages.

DLPX-73797

Fixed VDB refresh failures due to SQL Server Error 924 after setting VDB to single user mode.

DLPX-74025

Implemented logic to retry offline database along with a drop database to overcome deadlocks while off-lining or dropping the database.

DLPX-74029

VMware Hot-Add memory is not immediately reflected in the system API.

DLPX-74057

Fixed a typo in "Download Support Bundle" UI component where the word "suport" was missing a "p".

DLPX-74254

Ownership of files inside VDB now matches new owner when VDB owner is changed.

DLPX-74298

Fixed an issue where the user could not upload a keystore with a blank keystore passcode.

DLPX-74362

Fixes an issue with namespace deletion when the replication receive jobs have been cleaned up.

DLPX-74442

VDB Enable with attemptStart=false will now mount the datasets so that VDB can be started.

DLPX-74457

Cluster discovery for Oracle RAC clusters are partially failing on Solaris 10.

DLPX-74529

Fixed a bug so that an upgrade completes even when jobs fail.

DLPX-74542

Fixed a bug so that upgrade completion is properly handled after kernel upgrades.

DLPX-74645

Delphix Engine uses the uptime command to keep track of a target host reboot and auto start VDBs on the host. In some cases, the output of this command is not what is expected and causes unintended restart of a stopped VDB. This issue is now fixed.

DLPX-74656

Oracle errors during doCreateSPFile.sh are not captured.

DLPX-74704

Fixed a bug where the Dataset scroll does not extend to the bottom of a dataset list, thus truncating the status of the last dataset in the expanded group.

DLPX-74883

Prevent support bundle collection from cancelling replication.

DLPX-74911

Talaria TCP fallback fault may be misconstrued if an Oracle RAC node is down.

DLPX-74997

Prevent granting replicated roles to users.

DLPX-75083

Post upgrade cleanup task may become unresponsive while attempting a migration from 5.3.x to 6.0.x due to several threads stuck in WAITING state.

DLPX-75095

Provisioning an Oracle VDB fails if change-archivelog-mode.sh takes longer than 5 minutes.

DLPX-75134

Improved performance of the Environment Databases page under certain conditions.

DLPX-75188

Fixed "out of memory" issue when processing a large number of objects on the Target engine.

DLPX-75204

Addressed a performance issue on the Target engine when receiving large number of replicated objects.

DLPX-75208

Snapshot names are incorrectly redacted in the MDS dlpx_action table in support bundles.

DLPX-75416

Fixed a replication issue when there are sources with TLS enabled.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-72065Fixed a bug that can cause a Windows iSCSI initiator to fail connect to the Delphix Engine.
DLPX-72681Console Delphix status screen shows a Python stack trace if the system is configured with a static IP address.
DLPX-73423Console Delphix status screen shows a Python stack trace if the system has no default route.
DLPX-74216Fixed an issue that causes management service failures in low memory situations.
DLPX-74622Fixed a bug that can cause a replication job to fail with an internal error.
DLPX-75089Fixed a bug that can cause NFSv3 clients to lose locks during upgrade verification.
DLPX-75524Fixed a bug that can lead to Oracle data corruption when running VDBs on Oracle 19c with dNFS.

Release 6.0.7.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-39006

LogSync failed with "Cannot read archived log due to failure of log shipping script".

DLPX-39245

Fixed a bug that caused the management service to become inaccessible if the storage pool ran out of space.

DLPX-59155

Provisioning a VDB or vPDB failed with unclear error message 'A database with the name "xxx" already exists'.

DLPX-60317

Fixed Out of Memory issue when replicating a large number of objects.

DLPX-60947

Replica VDBs will be updated when performing a point-in-time restore.

DLPX-62805

vPDB provision did not raise an error when a non-provisionable target point-in-time was provided.

DLPX-62969

Fixed Out of Memory issue when receiving large number of replicated objects.

DLPX-64600

Skipped connecting to ASE dSources during SnapSync policy runs as it is not applicable for them, hence prevent recurrent faults that the policy throws for connectivity issues.

DLPX-67363

Maximum identify provider authentication time age can be customized for single sign-on.
DLPX-67607

Fix to make Snapsync throw exception if manifest file is missing or of 0 bytes instead of internal error with null pointer exception.

DLPX-67767

Fixed a bug that caused the upgrade to hang, while waiting for running jobs to finish.

DLPX-70821Allow the entity id for SAML single sign-on to be a URL for compatibility with Azure AD.
DLPX-71783

doRenameDatafiles cleanup of extra files fails due to file permissions mismatch.

DLPX-72010

Fixed an issue that prevents changing the default gateway using the network setup CLI.

DLPX-72075Maximum SAML response time skew can be customized for single sign-on.
DLPX-72191

Oracle privilege discovery not performed for all homes if an invalid home exists.

DLPX-72351

When a user tries to change credentials for a dSource, validating the credentials before updating them. In case of invalid credentials, showing user an error message about it.

DLPX-72545

Initial ORA-65294 error not reported to user when vPDB provision fails due to compatible parameter mismatch.

DLPX-72652

Fix and issue that prevents use of the NFSv4 on some versions of SUSE Linux targets.

DLPX-72698

Patching Oracle 19C vCDB leads to ORA-25153 as described in 2285159.1.

DLPX-72807

Fixed issue with SQL Server 2014 dSources with filestreams where sync failed in merging filestream directories due to long path names.

DLPX-72882

Datasets hooks script editor properly displays multiline scripts instead of as one long line on non-Chrome browsers.

DLPX-72916

Empty string in SNMPv3 USM username creation no longer throws fatal error.

DLPX-73048

Non-sys user credentials for Oracle sources cannot use password vault.

DLPX-73108

Fix a bug that prevents the API from displaying the correct number of CPUs or amount of memory assigned to a Delphix Engine after a hot-add operation.

DLPX-73201

Fix an issue that prevents the configuration of additional NICs on Azure Delphix Engines.

DLPX-73202

Fix a bug that can cause a VDB to fail to mount while other VDBs are being stopped.

DLPX-73424

Fix a bug that prevents the sysadmin from deleting a default route.

DLPX-73527

SnapSync job fails with 'internal error during execution' due to ONS/FanManager errors.

DLPX-73528

Fixed a bug that prevented accessing SDD specs from CLI.

DLPX-73611

Kerberos ticket expiration date parsing is incorrect after migration from Illumos to Linux.

DLPX-73742

Provisioning an Oracle TDE-enabled vPDB fails with the error "ORA-28367: wallet does not exist" if the TDE wallet for the target linked CDB is stored on ASM storage.

DLPX-73765

Fix a file descriptor leak that causes the management service to crash over time.

DLPX-73789

Auxiliary CDB instance uses dSource keystore location if WALLET_ROOT is configured in dSource.

DLPX-74030

CDB database password may be leaked as part of environment monitor checks that launch sqlplus command on the source or target host.

DLPX-74043

Delphix OS user cannot provision TDE-enabled vPDB due to directory permissions in the default wallet location.

DLPX-74044

Delphix OS user cannot provision TDE-enabled vPDB in Delphix-writable keystore location due to directory permissions.

DLPX-74119

Drop database fails if default database is set to any other than master.

DLPX-74164Sync fails with db.aseldb.source.dump_history.incomplete_stripes after dump history file is purged and Use dump history is enabled for the dSource.
DLPX-74233

During failover of a namespace, if there is a collision between an environment in the namespace with one on the target engine, the namespace environment will get renamed if its host does not match that of the environment on the target.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-73390

Improve replication receive throughput.

DLPX-73393

Improve write performance under extreme disk fragmentation.

DLPX-73280

Improve write performance under extreme disk fragmentation.

Release 6.0.6.1 Changes

Management Server Fixes

Bug NumberDescription
DLPX-73848Fixed an issue that can cause the management service to fail to start after upgrade on systems that have had SNMP enabled.
DLPX-73859Fixed a file descriptor leak triggered by faults and alerts that can cause the management service to fail.

Release 6.0.6.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-47065VDB recovery failed when files other than archive logs were detected by Oracle.
DLPX-47493

Fixed the bug where VDB directory under the DelphixConnector directory was not being removed from the target host on MSSQL VDB deletion.

DLPX-48046

Added sorting parameter to network test APIs.

DLPX-61405

Replication may send more data than expected if masking involves dropping large DBF files.

DLPX-61525

The height of the storage configuration list was limited to show 3 disks at a time. It will now dynamically grow with the number of disks.

DLPX-63603

Increased connector timeout from 10 minutes to 30 minutes to avoid unnecessary faults due to timeout during Validated Sync operation.

DLPX-67368

Delphix Engine hostname change is now immediately reflected in Splunk events.

DLPX-67593

Fixed an issue that caused the management service to remain offline following an out-of-space condition.

DLPX-68531

Introduced better handling of UniversalConnectionPoolException errors during SnapSync.

DLPX-69759

Oracle environment discovery failed due to an unhandled exception occurring at insert into dlpx_faults.

DLPX-69852

Fixed a bug that caused network configuration problems when removing and adding additional NICs.

DLPX-70426

Redaction of usernames took forever on tables with millions of entries.

DLPX-70583

move-to-asm.sh fails if timing is set in glogin.sql.

DLPX-70638

Removed Failed Actions section of Actions sidebar, in favor of manually dismissing from Running Actions and falling to Finished Actions section.

DLPX-70653

Removal of all instances in a RAC VDB should not be allowed.

DLPX-70808

Fixed issue related to the creation of empty DisableBroker.sql on the Windows machine in case DisableBroker.sql execution fails in the first attempt.

DLPX-70896

Added more detailed error message for when the Delphix Engine fails to push a script to Windows host.

DLPX-70919

Fixed an issue that causes job progress to not update in Self-Service.

DLPX-70928

Fixed a bug that results in a Delphix Engine remaining powered on following a shutdown from the user interface.

DLPX-71093

For AG databases, a full backup is not required even recovery fork guid changed but the LSN chain didn't break because of transactional log backups.

DLPX-71097

Unable to ignore snl.bct.needed warnings if Block Change Tracking is legitimately disabled on an Oracle dSource.

DLPX-71153

Recovery of PDB should fail if the database is down after offlining datafiles.

DLPX-71370

While deleting initiator in Windows environment deletion operation, delete all the views as well for that initiator.

DLPX-71685

VDB is auto disabled if the hook fails.

DLPX-71865

Reduced the size of support bundles.

DLPX-71961

When a PDB is selected for replication, its CDB and all other PDBs in the parent CDB get automatically selected for replication.
Going forward, in the above scenario, while the CDB will get selected, its other PDBs will no longer get selected.

DLPX-72031

Fixed VDB refresh operations failures due to 'DB STARTUP' background process spid greater than 50.

DLPX-72066

Migrate VDB verifies against the old configuration, rather than new.

DLPX-72083

Fix an issue that causes a fully-qualified hostname to be changed on upgrade from 5.3 to 6.0.

DLPX-72131

Added namespace support for HashiCorp password vaults.

DLPX-72265

doCreateTempfiles.sh.template exits with code 0 on failure.

DLPX-72340

Incomplete recovery not detected during provisioning.

DLPX-72386

Unlock Solaris x86 Solaris -> Linux x86 provisioning.

DLPX-72452

For clusters with long hostnames, vPDB sync fails with exception.oracle.accessor.instances.missing.

DLPX-72495

Fixed a bug that prevents the application from coming up after an upgrade

DLPX-72686

Delphix no longer logs environment variables in logs on connected hosts since this could leak sensitive information such as passwords that are sometimes stored as environment variables on database hosts such as for the ASE database.

DLPX-72730

Fixed a Snapsync performance issue.

DLPX-72790

SnapSync job fails with 'internal error during execution' due to ORA-01652.

DLPX-72862

The scenario which was causing the null pointer has been fixed now.

DLPX-73300

Validation of connection to a container for PDBs should allow connecting to CDB$ROOT.

DLPX-73311

Added platform detection for ESX 7.0u1.

DLPX-73449

Replication of policies between two engines, in a loop, could lead to OOM exceptions.

Delphix OS Fixes 

Bug NumberDescription
DLPX-72990Addressed a minor CVSS 5.9 security issue with no known attack vectors.
DLPX-73067Fix for CVE-2020-10753.
DLPX-73069Fix for CVE-2020-12059.
DLPX-73070Fix for CVE-2020-1760.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-71924Fixed a bug that causes support bundle collection to fail with an internal error.
DLPX-72918Fixed a system crash that can happen when replicating a masked VDB using SDD.
DLPX-73147Fixed a bug that can cause a replication source to crash if it had run replication while running on 5.0.

Release 6.0.5.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-23360

The unistallation of the Delphix Connector installer should succeed even if one of the component connector services doesn’t exist.

DLPX-69155

Reduced the time taken to generate support bundles in some cases.

DLPX-67316

Recreating a controlfile against an Oracle source may yield misleading error during snapshot.

DLPX-70766

JDBC driver updated to resolve intermittent JDBC connection failures due to JDBC SSL bug.

DLPX-70785

Options passed to VDB mounts on target AIX hosts did not include read and write size values. This fix adds the rsize and wsize parameters to mount command depending on the maximum values host is configured to support.

DLPX-70741

Enabling Validated Sync while SAP ASE SnapSync job is running leaves staging database unrecoverable.

DLPX-69865

Fixed a bug that causes a network interface to become unconfigured if its MAC address changes.

DLPX-71233

If LogSync is suspended when performing SnapSync of a standby database in real-time apply, SnapSync attempts to backup the archived logs which can cause SnapSync to become unresponsive.

DLPX-69800

UEM/Hostchecker directory ownership checks fail on HPUX environment with long usernames.

DLPX-69807

Provided mechanism for the user to bypass corrupted/incomplete jdbc libraries.

DLPX-66585

Bundle ID "fault.environment.configuration.file.owner" reports insufficient host address.

DLPX-65739

createDelphixDBUser.sh fails when "@" used in the password.

DLPX-70973

SAP ASE database provisioning fails if the source database has holes in log fragments.

DLPX-71532

Improved error handling for Oracle memory configuration errors.

DLPX-62987

Allowed assigning privileges over replicated objects through the UI.

DLPX-71593

TIMEFLOW_REPAIR incorrectly skips a log because of "wrong database".

DLPX-71751

Added NFSv4 support on AIX for Oracle and SAP ASE.

DLPX-71736

Dynamically disable RPC services if NFSv3 is no longer in use.

DLPX-71772

Network DSP Test between versions 5.3 and (6.0.3, 6.0.4) is fixed.

DLPX-71513

Replicate non-data objects like delphix engine users, authorizations, roles, permissions, policies and DB config templates.

DLPX-71305

Unable to load dummy recovery database dump due to SAP ASE error 15728.

DLPX-71172

Enabling SAP ASE dump history causes IllegalStateException in getDumpListFromLastRestoreDateAndFiles due to timestamp mismatch because of TZ.

DLPX-71178

SAP ASE internal error raised when dump history file is purged using sp_dump_history.

DLPX-65101

Fixed a race condition between a DB_DELETE job and the Oracle retention policy worker for the same container that can lead to a deadlock between the job and the worker.

DLPX-71918

Fixed an issue that causes the Delphix Engine UUID to change upon rebooting in IBM Cloud.

DLPX-71141

Fixed an issue where upgrading an Oracle dSource or changing the environment user in a linked Oracle dSource fails with the error "SOURCE_UPGRADE job for xxx failed due to an internal error during execution."

DLPX-71611

Updated UI time zone library to IANA 2020a.

DLPX-70349

Fixed a memory leak during incremental replication.

DLPX-72038

Fixed an issue that prevents 5.3.x - 6.0.x upgrade if a static route exists that goes over a DHCP interface.

DLPX-72148

Fixed a bug of always order hooks alphabetically rather than the running order set by users.

DLPX-71971

Allowed Enable/Disable of VDB if its current Timeflow has at least one snapshot.

DLPX-72115

Changed the Time Point field on a VDB back to reflecting the point on the parent the VDB was created from, but displayed in the timezone of the parent.

DLPX-71995

6.0.4.0 can no longer interact with 5.3.x remote Masking Engines.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-70675Fixed a bug that causes the system to become unresponsive after expanding multiple storage devices.

Release 6.0.4.2 Changes

Management Server Fixes

Bug NumberDescription
DLPX-72155Fixed an issue that can render a Delphix Engine unbootable if a reboot occurs after upgrade verification but before the upgrade is applied.
DLPX-71141

Fixed an issue where upgrading an Oracle dSource or changing the environment user in a linked Oracle dSource fails with the error "SOURCE_UPGRADE job for xxx failed due to an internal error during execution."

Release 6.0.4.1 Changes

Management Server Fixes

Bug NumberDescription
DLPX-71930

Fix a bug that causes feature flags to be disabled when upgrading to 6.0.4.0.

Release 6.0.4.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-68173

Resolved an issue where temporary database backup/device files created for cleaning up the target database were not being deleted.

DLPX-68773

The management stack runs out of memory as the environment monitor does not purge stale objects.

DLPX-69573

Allow linking an Oracle PDB with a lowercase name.

DLPX-69634

Allow provisioning an Oracle PDB with a lowercase name.

DLPX-69962

After detaching a PDB, perform unplug/plug, and attach again, if disabled is performed before SnapSync, the PDB can no longer be enabled.

DLPX-66045

Prevent Self-Service Container branches getting into an unusable state by blocking deleting the last segment of branches.

DLPX-7037

Snapsync performs an unnecessary checkpoint.

DLPX-68277

Users will see the detailed error message upon connection failure to Delphix connector during OS user validation and there will also be a "More" button with an error message which will open an error popup with all error details.

DLPX-70288

On the "Add Environment" screen when OS user validation will get fail, they will see the "More" button along with the error message. When the user clicks the button, an error popup opens with all details of the error and suggested action.

DLPX-70832

NFSv4 support for appdata sources running on AIX.

DLPX-68495

Fixed GUI reporting conflict information when creating a Retention Policy.

DLPX-70788

Added Environment User field for MSSQL sources in Datasets -> Configuration -> Source tab -> Staging Environment section.

DLPX-58047

Fixed bug where the sort sequence was incorrect. Fixed in Hook Operation Templates.

DLPX-67931

Provision against VPDB after create/drop a new tablespace failed with exception.oracle.targetscripts.rename.datafiles.

DLPX-59910

Comps.xml associated with Oracle Homes are marked as unparseable if they are longer than 65535 characters.

DLPX-55476

CLI provisioning fails when the mount point provided includes quotes around the path.

DLPX-71168

Changed type to text and spaced "Secret Key" and "Username Key".

ORB-3285

Support using api.delphix.com as a proxy for verifying the Cloud Agent binary's code signature certificate.

DLPX-71006

Allow provisioning across patch versions for Oracle versions on or after 18.X.

DLPX-71334

Migrate NTP configuration when upgrading between 5.3 and 6.0.

ORB-3286

Communication with Central management servers is now routed through the web proxy when one is configured for the Engine.

ORB-3117

Summary: Increase an action's failure message size to 256 characters so users can view large failure messages.

Release 6.0.3.1 Changes

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-71339Fixed an issue that can cause the Virtualization Management service to become inaccessible when the system memory became highly fragmented.

Release 6.0.3.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-63192

More details will be displayed in the error message in case DB_SYNC fail due to missing SELECT permission on database 'msdb'.

DLPX-67708

Removed unnecessary Source Continuity source-archive file system.

DLPX-66878

A meaningful error message will be displayed in case the user is missing 'VIEW ANY DEFINITION' and 'VIEW SERVER STATE' permissions on AG Instance and linking is performed.

DLPX-68668

Fixed the issue when Environment discovery fails with Internal Error when Oracle DB instance name is > 15 characters.

DLPX-68539

Added support for Read-Only Oracle homes.

DLPX-62027

Fixed a bug that causes factory reset to fail when there are provisioned VDBs.

DLPX-67830

Eliminated a virtualization management service crash caused by egregious use of memory by environment monitoring.

DLPX-69067

Enabled NFSv4 support for older RedHat NFS clients.

DLPX-68491

Fixed an issue when SCAN Listener is not discovered for Oracle 19c Cluster Environment.

DLPX-68931

Improved replication throughput by parallelizing data streams.

DLPX-69350

Fixed an issue where in some cases a VDB's Time Point would not appear.

DLPX-62602

Prevented a full snapsync after detecting an incarnation change of and reverting to a previous incarnation of an Oracle database.

DLPX-69579

Resolved the issue of intermittent failure of DB_SYNC for source database full backups containing in-memory tables which were caused due to improper merging of filestream folders.

DLPX-69104

Fixed an issue when Environment Monitor task monitors replicated entities could lead to Out of Memory.

DLPX-58561

Increased online Redo Log size when using VDB Provisioning defaults from 50mb to 1024mb.

DLPX-68831

Storage is removed even when the drop database fails, causing ASE error 823.

DLPX-68323

Linking will not fail in case a slash is used as the path delimiter on the source database.

DLPX-69561

Allowed NoLogging Diagnosis to be shown and edited for Oracle CDBs.

DLPX-69625

Fixed an issue that causes the CLI to hang when deleting an object.

DLPX-65357

Source Environment selection in Attach dSource dialog is now alphabetically sorted.

DLPX-65215

Fixed an issue where Hotfixes aren't listed until after management service restarts.

DLPX-57988

The increased timeout of doShutdownOracleInstance.sh script from 20 seconds to 10 minutes.

DLPX-70018

Resolved the issue where during validated sync, fault "fault.mssql.source.next.backup.missing" was caused due to backupsets with similar first and last lsn.

DLPX-66671

dSource selection in dSource Linking Wizard is now alphabetically sorted.

DLPX-65723

MSSQL server cluster address is now editable through the Environments GUI.

DLPX-69514

Gracefully handle accelerated networking on Azure.

DLPX-68942

Implemented retries with some time delay in case of a failure while switching database user mode.

DLPX-56626

Some orcl_log_info entries have a very large and incorrect end_scn (281474976710655).

DLPX-67579

Deleted users' actions should be included in the action/audit log API results.

DLPX-69863Enhanced instruction text relating to SSH when editing environment users.
DLPX-70081

Removed excessive debug logging for DSP connections which results in fast rollover of debug logs.

DLPX-66203

CLI / API calls to refresh/rewind vCDB directly should be disallowed.

DLPX-67194

RHEL 7.6 connector log shows Unidentifiable version string: RedHatEnterpriseServer 7.6.

DLPX-66754

When VDB is disabled, environment configuration can now be edited in the UI.

DLPX-62095

A wrong certificate is identified as an issuer of a self-signed certificate in rare cases.

DLPX-69243

Do not require an issuer to be present or keep the full chain intact on Truststore operations.

DLPX-59331

Permit non-CA certs in user Truststore.

DLPX-60779

Changed error message when there are no compatible installations on provisioning.

DLPX-69518

Provisioning failures due to BitLocker encryption will be identified and a proper error message will be displayed.

DLPX-64797

Fixing memory leak in hk2 library.

DLPX-70039

Password vault migration nullifies ASE linked source dump credentials.

DLPX-70089

Protection against a variant of billion laughs attack (XML entity expansion).

DLPX-64207

Added API support to revert from static to DHCP DNS settings.

DLPX-68857

Faults reported for Oracle Home missing where the Central Inventory does not show this Oracle Home present.

DLPX-64435

Exclusively specifying 'required' parameters to discover Oracle cluster via CLI results in an exception.

DLPX-69604

Alerts & Faults are reported for hosts in a namespace that can cause Out of Memory issue.

DLPX-39882

Prevented cloning of Tiimeflow storage for Oracle source continuity.

DLPX-67425

Resolved an issue when validated sync (with full/diff) restored multiple backupsets and a restore failed with a SQL server transient issue after a source continuity reset event resulting in a state where no operations could be performed on the dSource.

DLPX-70433

"DLPX_EXECUTE_SQL_CLEANUP_RETRY" will also print nested SQL error messages in case of command failure.

DLPX-68582

Customers now have access to an API to display the Engine License information.

DLPX-61335Displayed in confirmation dialog the name of the user being deleted.
DLPX-70639

Resolved output buffer issue while identifying BitLocker encryption during provisioning on Win19.

DLPX-66259

Updated messages on the upgrade page when the operation fails.

DLPX-70782

Bumped up connector version for NET 4x installer as shipped OpenJDK version had been upgraded.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-68995Improved performance of dataset deletion.

DLPX-68997

DLPX-68999

Improved single connection replication throughput.

DLPX-70697

DLPX-70703

Addressed an issue that causes long periods of I/O unresponsiveness.
DLPX-69953Fixed a bug that can cause a Windows iSCSI initiator to fail to connect to the Delphix Engine.
DLPX-70512Fix a hang in the I/O subsystem that can cause the Delphix Engine to become unresponsive.

Release 6.0.2.1 Changes

Management Server Fixes

Bug NumberDescription
DLPX-70065

Provisioning a VDB from a dSource or another VDB will fail if the following conditions are met:

  • Delphix Engine has at least one dSource and a VDB created using a Python plugin prior to the upgrade
  • Delphix Engine was upgraded to 6.0.2
  • Provisioning was attempted from the UI after the completion of the upgrade
DLPX-69350

Fixed an issue that the time point attribute of a VDB is not shown.

Delphix OS Fixes (Activated after optional Reboot)

Bug NumberDescription
DLPX-69864Fixed an issue that causes MSSQL operations to hang after the reception of an iSCSI LUN reset.

Release 6.0.2.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-62806Fixed an issue where provision against PDB after unplug/replug against the same linked PDB fails with exception.oracle.targetscripts.controlfile.create.
DLPX-67567Oracle Source Continuity creates an unnecessary source-archive file system on zfs.
DLPX-27807LogSync may fall behind when connected to an Oracle physical standby database in Real-Time Apply mode.
DLPX-68385Customer provided Oracle Java missing in the search path for Java on hosts.
DLPX-62782Reducing the number of nodes for RAC VDB and VDB in NOARCHIVELOG mode may result in ORA-00258 errors during VDB enable operation.
DLPX-62738

Better error message when plugins are uploaded out of sequence. 

DLPX-68722The product now recognizes VMware with BIOS date of 12/12/2018 as VMware 6.7.0u2.
DLPX-68579SnapSync of Oracle 19c DB with encrypted tablespace fails with fatal exception "Block header 91 is not empty".
DLPX-68689Fixed the issue where a huge number of error messages from ASE caused OutOfMemory Error.
DLPX-68957Always On AG discovery will not fail in a multi-subnet environment.
DLPX-63088Can now recover multiple Self-Service containers at the same time.
DLPX-47977Improved handling of snapshot standby.
DLPX-64125SnapSync failed with exception.oracle.dsource.sync.no_hosts.rac on RAC clusters with very long hostnames.
DLPX-62584PDB enable failed after migration if mountBase has a trailing slash.
DLPX-68657

Virtualization can now fetch jobs from Masking engines configured with HTTP redirection.

DLPX-69121

It is no longer mandatory to have at least one enabled system administrator with local credentials.

DLPX-68167Fixed an issue where too many requests were being sent for Faults from the Datasets pages.
DLPX-69082Large stderr produced by failed rsync jobs are truncated to prevent Java OutOfMemory errors.
DLPX-58600Datasets filter updated so that all items within a group that matches the filter string are displayed, even if the items contained in the group do not match the filter string.
DLPX-65896VDB deletion failed due to the inability to delete LogSync worker.
DLPX-57903Improved diagnosability of PDB discovery issues.
DLPX-68878Fixed issue where start/stop buttons were not being displayed in the RAC instances configuration table.
DLPX-69271Enabled replication smart failover by default.
DLPX-66715The user-visible name for Oracle cluster objects is being replaced with the Oracle cluster name. For Windows clusters, the user-visible name is being replaced with the cluster address.
DLPX-68929Changed default replication settings for better out of the box performance.
DLPX-68930Improved replication throughput when sending multiple timeflows.
DLPX-69245Fixed a memory leak that occurs when experiencing connectivity errors.
DLPX-69377At least one non LDAP system user should be enabled when the LDAP server is being disabled.
DLPX-68575LDAP principal fields were not being redacted in phone-home bundles.
DLPX-68528

Self Service Recover operation failed due to missing Timeflow.

Delphix OS Fixes  

Bug NumberDescription
DLPX-66808Re-introduced console splash screen with IP address and service states.

Release 6.0.1.1 Changes

Delphix OS Fixes (Optional on Reboot)

Bug NumberDescription
DLPX-69203Improved synchronous write performance over iSCSI.
DLPX-69167Improved SQL Server data ingestion performance by leveraging asynchronous writes on underlying storage.
DLPX-69298Eliminated possible data corruption on SQL server and vFiles over iSCSI that can occur when a Delphix Engine reboots.

Release 6.0.1.0 Changes

Management Server Fixes

Bug NumberDescription
DLPX-60689For SAP ASE, instead of using the DBCC CHECKALLOC command to fix DBID mismatch issue, the MOUNT command with FIXDBID and ALLOW_DBID_MISMATCH clauses will be used, to improve performance.
DLPX-65831VDB snapshots need to clean unneeded ZFS datafiles.
DLPX-63949Improved boot time after 5.3 to 6.0 migration by optimizing metadata indexing.
DLPX-66261Upgrades to 6.0.0.0 will only be supported from a release greater than or equal to  5.3.6.0.
DLPX-66486Snapshot of a linked database can end up with extra datafiles that do not belong to the database which might cause VDB on VDB provision to fail during rename of datafiles.
DLPX-66558Cluster environment discovery was incomplete if the host locale was not English.
DLPX-66804DB_LINK using incorrect user when RAC node also configured as a standalone environment.
DLPX-66768vPDB save state lead to rollback or child provisioning failures.
DLPX-66823Unable to link database with CL8MSWIN1251 charset.
DLPX-64538Fixed a bug causing the timezone selector to only be visible when manually setting the time.
DLPX-66809Removed the Windows Diagnostics Files and Directories on successful Diagnostics upload.
DLPX-67279Provision failed when the source was from a RAC Oracle Standard Edition database and the target was Oracle Standard Edition.
DLPX-67451Fixed an issue that sporadically caused replication to fail with an internal error.
DLPX-67454Delphix Engine should select the highest version ojdbc driver available at ORACLE_HOME/ojdbc/lib.
DLPX-66077Ensures child worker threads are gracefully exited when parent linked source sync job has completed/terminated.
DLPX-45983MSSQL Validated sync will resume when storage usage falls below the threshold if storage threshold enforcement failed in the past.
DLPX-67560Fixed an issue where MT provision may result in ORA-02058 due to un-purged or inflight 2PC transactions on dSource.
DLPX-67594Old timeflows and snapshots are not getting removed by snapshot retention.
LX-2020Report the correct amount of memory allocated to EC2 Nitro instances.
DLPX-67413Fixed an issue where VDB point in time provisioning might fail if Oracle database environment is configured in a non-English locale.
DLPX-67684PDB provisioning failed if the source had shutdown triggers.
DLPX-67575Fixed failure during point in time 'Virtual to Physical' provisioning.
DLPX-67668
After setting the database online give it some extra time to startup completely, before doing any further operation on it.
DLPX-67759Redact sensitive information from phone-home data.
DLPX-64638Validated sync stops working if Delphix cannot connect to the backup server.
DLPX-65559Even when the staging instance is down, attempt counter to detect backup files keeps on increasing and eventually, it stops detecting backups.
DLPX-56537When a target host is used by a large number of dSources for staging or has a large number of objects, the performance of Delphix operations like validated sync, refresh, rewind, etc can be slow due to Powershell processes being serialized.
DLPX-67894Removing cluster resource without removing its dependency can result in cluster failure. So, added retryer logic while fetching the resource dependencies (Get-ClusterResourceDependency) and ultimately fail the operation after all the retries.
DLPX-67813Unsupported SQL server backup type gets picked while validated sync and the operation fails while looking for the backup. So, introduced a tunable filter to automatically skip SQL backups taken by backup software not supported by yet Delphix.
DLPX-67925Added env host connectivity toolkit support for SLES on Power9.
DLPX-67934Retries to fetch image identifiers during Netbackup restore if there is a mismatch between MSDB and Netbackup Master.
DLPX-67655Fixed an issue where retention enforcement can generate user-visible errors while attempting to delete snapshots with dependencies after PDB migration to new CDB.
LX-1944EBS NVMe devices can now be used in Delphix Engines.
DLPX-68022Fixed an issue where hostchecker 'Check Oracle DB Instance' fails on HPUX and AIX.
DLPX-68124PDBs with lower/mixed case names will not enable after an upgrade.
DLPX-68126Fixed a bug that limits the number of disks that can be added in GCP.
DLPX-67421Update the primary db file names in a transaction with the Timeflow creation to make sure whenever a Timeflow is created successfully we have its primary file information.
DLPX-67440Skip VDBs having its current Timeflow as null from 'PrimaryDbFileAvailabilityCheck' as these VDBs doesn't undergo queisceing and are recoverable by refreshing them.
DLPX-61818Linking wizard - Target Environment step - Privileged Credentials authenticates on the selected target now.
DLPX-68117Some non-Admin users, lack all permissions, are unable to login to upgraded engine.
DLPX-67290A wrong version input by user while manually adding a SQL Server instance, created issues in provisioning VDBs. SQL Server version will now be auto-discovered for manually added instances on adding or refreshing the environment.
DLPX-66238Updated error message to let know user that non discovered CDBs are filtered out from the list when linking a detached source.
DLPX-68457When a target host is used by a large number of dSources for staging or has a large number of objects, the performance of Delphix operations like validated sync, refresh, rewind, etc can be slow due to Powershell processes being serialized.
DLPX-68484Fixed the issue where 'lstart' column value of sysusages table was beyond the range of Integer data type by taking the Long data type to store the lstart value.
DLPX-68500Fixed an issue where the NTP service is not started following a reboot.
DLPX-68290Support bundle generation can be time-consuming if the engine has a large number of snapshots to process.
DLPX-67792Fixed issue in grids in which the selection checkbox was unclickable.
DLPX-67555Provision vPDB/vCDB fails with ORA-45900 if the parameter enable_pluggable_database is omitted when specifying database parameters for new vCDB.

Delphix OS Fixes

Bug NumberDescription
DLPX-67782Engines running 5.3 on EC2 i3 can now be migrated to 6.0.
DLPX-67961Fixed an issue that prevents ssh access after switching to a static IP address.
DLPX-65948Fixed a bug that could cause replication jobs to fail with internal errors
DLPX-68025Improved boot time after 5.3 to 6.0 upgrade by reducing the overhead of setting ZFS properties.
DLPX-67868Fixed a bug that can cause the management service to run out of memory when disabling the Splunk integration.

Release 6.0.0.0 Changes

Management Server Fixes

Bug Numer

Description

DLPX-27433The analytics GUI network graph shows newly added NIC information without requiring a management service restart.

DLPX-33998

If you add a hook script via the CLI, newlines are removed erroneously.

DLPX-40094Correctly set the default type for the parameters to all operations in the CLI according to the container type.

DLPX-43215

Exclude sybsecurity from the list of auto-discovered databases.

DLPX-48712

Java 6 packages are no longer included in the product image.

DLPX-48280

When a user is set with the Provisioner role the 'provision' button does not appear, meaning anyone set with this role only is unable to provision VDBs.

DLPX-53996

The Delphix Engine does not provide instructions to browsers to avoid caching HTTP responses (pages).

DLPX-54740

Ensure Windows mount points are always unmounted as part VDB refreshes to prevent future VDB refreshes from failing due to "ERROR_ASSIGN_MOUNTPATH: failed to assign mount path for disk <dsik_number> at <mount_path>, error -2147024751".

DLPX-55282

In environments where the vPDB has been provisioned using a Delphix provisioned virtual CDB, shutting down the virtual PDB causes it to get into an incorrect "Cannot monitor" state, this has now been fixed to show the correct "Stopped" state.

DLPX-55598

Fixed an issue where vPDB refresh/rollback triggers spurious vCDB restart jobs, after vPDB+vCDB auto-restart.

DLPX-55829

Validated Sync can fail when monitoring ASE backup servers started by using the $DSLISTEN environment variable instead of the "-S" argument. This can be worked around by accessing $DSLISTEN in the RUN_xxxxx script and pass it down as -S.

DLPX-55958

VDBs with no snapshots failed to re-enable after a Delphix Engine upgrade, this has now been fixed.

DLPX-57454

Display underlying ssh error when environment host connections fail.

DLPX-58519

Enable Oracle LiveSource when LiveSource is in RESYNC_NEEDED state currently re-start Oracle Redo Apply. Oracle Redo Apply should not be restarted in this state.

DLPX-58760

Fixed a TCP port leak in the network throughput test feature.

DLPX-58845

Provisioning vFiles to the same host using different OS Environment Users no longer fails.

DLPX-59772

The API to list all snapshots consumes a significant amount of memory when there are more than 100,000 snapshots on the engine.

DLPX-60356

Fixed an issue where Oracle remote listener registration fails if set to empty string.
DLPX-60603Network settings dialog now displays actual MTU value rather than a checkbox.

DLPX-60907

Fixed an issue where the Environment Monitor on Redhat 6.9 and 6.10 might throw unidentified version errors.

DLPX-60979

When user configures connection strings manually, these connect strings can end up connecting to incorrect PDBs/CDBs causing invalid snapshots. Verify that each connection to a PDB/CDB connects to the expected PDB/CDB.

DLPX-60993

Delphix backups create controlfile records; in rare circumstances, these records can cause invalid snapshots. To avoid this problem, remove Delphix backups control file records when using SCN-based SnapSyncs once a SnapSync completes successfully.

DLPX-62094

Allow certificates to expire after issuer certificate expiration.

DLPX-62241

Reduce SSH connections by temporarily preserving and reusing existing Delphix<->host connections where possible.

DLPX-62781

Spurious job event "DISCOVERED_TO_MANUAL_ORACLE_CLUSTER_NODES" no longer shows up for non-Oracle RAC environment refreshes.

DLPX-62892

In Oracle versions 18c and 19c, an Oracle bug can prevent the datafile headers from being updated for a standby database when managed recovery is running, resulting in failed SnapSync operations. Alert the user that an Oracle patch might be needed.

DLPX-62962

Removed unneeded EMPTY_RENEGOTIATION cipher

DLPX-62998

Fixed an issue where stale file mounts may be leftover when vPDB provision fails.

DLPX-63469

Initial setup now fails if the system was not provisioned with enough storage.
DLPX-63600Network settings dialog now displays actual MTU value rather than a checkbox.
DLPX-64641Fixed an issue where the last snapshot of a vPDB Timeflow can be deleted after the vPDB has been disabled, thus leaving the vPDB in a state with no provisionable snapshots.

DLPX-64711

Allow provisioning to complete when source CDB includes PDBs in a broken state.

DLPX-66020

Provision should remove files present in datafile filesystem that are not part of the database when provisioning a VDB from a VDB.

DLPX-67299

ASE environment discovery will not fail if there is a mismatch of "dataserver name argument" and value of "@@servername".

Delphix OS Fixes

Bug NumberDescription
DLPX-57384Fixed a system hang caused by a deadlock in ZFS.