Each VDB has its own data management settings, found during the provisioning workflow as well as in the configuration page for that VDB. When you create a VDB, the Delphix Engine copies configuration settings from the dSource and uses them to create the VDB. 

The following settings are available for Oracle VDBs:

VDB Setting

Explanation

Mount Base

The directory to which Delphix will provide mounted storage. This is where the contents of this VDB will be located.

VDB Configure Parameters

These are customizable parameters of the VDB that you can set either in the provided table or in the text field. This concept is described further below.

Open Database After Provision

Open the VDB immediately after the provision completes. Enabling this option allows you to set the four parameters below: 

  • Online Log Size (MB)
  • Number of Online Log Groups
  • Enable Archivelog Mode
  • Generate new DBID for VDB

This setting is recommended to tune the Oracle database settings to match your requirements. Each of these four helps Delphix manage the Oracle database optimally.

When provisioning an Oracle VDB with the "Open Database After Provision" option unchecked, the subsequent snapshot job fails because the database is not open. In the UI will show that the provision failed, but this is not the case. A VDB provisioned this way will exist with stop/start enable/disable function, but will need to be manually started on every refresh. 

Online Log Size (MB)

Also known as the online redo log, this specifies the size of the VDB’s redo log. We recommend increasing this value to 1024 MB for improved performance.

Number of Online Log Groups

The number of online log groups to be assigned to this VDB. The number of groups will depend on the configuration of your VDB. For more information, please visit Creating Redo Log Groups and Members.

Enable Archivelog Mode

When you enable this mode, redo logs will be archived instead of overwritten. This creates a backup of all transactions that have occurred in the database so that you can recover to any point in time. These archive logs are useful for recovering a database or updating a standby database.

Generate new DBID for VDB

Create a new Oracle DBID value for this VDB.
Note: You can set this option only at the time of provisioning a VDB and you can not change this after VDB is created.

Listeners

Select an Oracle listener from the list provided to use with this VDB.

Auto VDB Restart

Enabling this option will automatically restart this VDB whenever its target host is rebooted. Auto VDB Restart can help you recover from host downtime automatically since the Delphix Engine will restart VDBs once they become available.

Configure File Mapping

This option allows you to leverage Oracle’s File Mapping feature with a VDB. Enabling this will add a step to the provisioning wizard to create file mappings.


Using Oracle Multitenant offers different configuration settings, as described in the table below:

Multitenant Setting

Explanation

vCDB Database Parameters

vCDB Database Parameters are Oracle configuration settings you can apply during the provisioning process. You can specify name-value pairs to apply these settings to the vCDB if you are creating one.

Auto vCDB Restart

Enabling this setting will automatically restart this vCDB whenever the target host is rebooted. This will cause all vPDBs in the vCDB to restart as well.

VDB Config Templates

A VDB config template is a list of database configuration parameter names and values that you can save on the Delphix Engine to use at a later time.

Creating a VDB Template Via GUI

  1. Log into the Delphix Management appliance as an Engine administrator.
  2. Click Manage.
  3. Select VDB Config Templates.
  4. Click theicon next to the VDB Config Temp... and select New Template to create a new template.
  5. In the New Template dialog, enter the name for the new template, parameters that you want to provide, and select the source type from the available options. 

  6. Click Create.

Updating a VDB Config Template Via GUI

  1. Log into the Delphix Management application as an engine administrator.
  2. Click Manage.
  3. Select VDB Config Templates.
  4. Select the template from the left-side pane that you need to update.
  5. Click on the pencil icons to edit an existing VDB template. 
  6. Click the button to save the changes or click the button to discard the changes that you made.

Apply/Configure a VDB Config Template to a VDB Via GUI

  1. Login to the Delphix Management application as an engine administrator.
  2. Click Manage > Datasets.
  3. Select the VDB you want to edit.
  4. From the right-side pane select the Configuration tab. 
  5. Click on the pencil icon next to 'DATABASE' to be able to edit the database. 
  6. To apply an already existing VDB template, select from the available template in the drop-down under VDB Config Template.
    Similarly, you can configure the VDB for an already associated template from the available templates.

  7. Click the button to save the changes or click the button to discard the changes that you made.

You can apply a VDB Config Template to a VDB during the provisioning process, which copies the values from the template. Any subsequent changes to the template will be reflected in the VDB when that VDB is refreshed. During provisioning, you can specify configuration parameters directly or copy them from a VDB Configuration Template. Once set, the Delphix Engine will use these parameters whenever the VDB is refreshed, even if you change the original template.  It is important to know, however, that some configuration parameters cannot be customized. In addition, some configuration parameters are stripped out during the provisioning process but are customizable. The list of restricted and customizable parameters can be found below.

Required Parameters

The VDB configuration template must contain at least the following database parameters:

  • compatible: Required for both Non-Multitenant and Multitenant sources. Must be set with the same value as in the dSource 'compatible' parameter.
  • enable_pluggable_database: Required for Multitenant sources only. Must be set to TRUE.

Customizable VDB Configure Parameters

The default value for these parameters is cleared during the provisioning process. They are removed from the VDB configuration file unless you set values for them through a VDB Config Template.

  • audit_file_dest
  • audit_sys_operations
  • audit_trail
  • background_dump_dest
  • core_dump_dest
  • db_domain
  • diagnostic_dest
  • dispatchers
  • fast_start_mttr_target
  • log_archive_dest_n
    • n can be values between 1 - 31
  • log_archive_dest_state_n
    • n can be values between 1 - 31
  • remote_listener
  • user_dump_dest

Restricted Parameters

These parameters are restricted for use by the Delphix Engine. Attempting to customize these parameters through the use of a VDB Config Template will cause an error during the provisioning process.

  • active_instance_count
  • cluster_database
  • cluster_database_instances
  • cluster_interconnects
  • control_files
  • db_block_size
  • db_create_file_dest
  • db_create_online_log_dest_n
    • n can be values between 1 - 5
  • db_file_name_convert
  • db_name
  • db_recovery_file_dest
  • db_recovery_file_dest_size
  • db_unique_name
  • dg_broker_config_file1
  • dg_broker_config_file2
  • dg_broker_start
  • fal_client
  • fal_server
  • instance_name
  • instance_number
  • local_listener
  • log_archive_config
  • log_archive_dest
  • log_archive_duplex_dest
  • log_file_name_convert
  • spfile
  • standby_archive_dest
  • standby_file_management
  • thread
  • undo_tablespace
  • __db_cache_size
  • __java_pool_size
  • __large_pool_size
  • __oracle_base
  • __pga_aggregate
  • __sga_target
  • __shared_io_pool_size
  • __shared_pool_size
  • __streams_pool_size

Related Topics